AMX G3 manual Edit Bar Button Menu Options, Add

Figure139

Edit Bar — BUTTON menu options

Note

Buttons with Unicode Fonts can only be created and edited within TPDesign 3 then imported to the Touch Panel.

Edit Bar — Button Menu Options

Press EDIT and BUTTON to open the menu shown in Figure 139.

You can use the BUTTON menu to create, configure, and revise Touch Panel button settings. The Touch Panel can however use the other BUTTON menu features on them. The Edit bar also shows the current page name. The Edit bar also shows the current page name. The Edit bar in Figure 139 shows MAIN PAGE is the current page.

Add

Press ADD to add a button when the ADD BUTTON message (Figure 140) appears on the LCD. The first touch point is the upper-left corner of the button.

Figure140

ADD BUTTON message

Drag your finger horizontally across the screen and down to set the height and width of the button. When the new button appears on the page, the message bar shows you the X/Y page-position coordinates and the X/Y resolution size.

80 Touch Panel Program Reference Color Active-Matrix LCD Touch Panels