AMX G3 manual Color Active-Matrix LCD Touch Panels Designing a Touch Panel

Note

If you press ENTER after typing in an incorrect password, you are immediately returned to the previous page.

Figure30

PROTECTED SETUP page

3.Type 1988 in the keypad, and press ENTER to open the PROTECTED SETUP page (Figure 30). For information on changing the password, refer to Touch Panel Program Reference section. If you enter a wrong number, press CLEAR and re-enter the number.

4.Press EDITOR to enable the Editor mode. The active mode of the EDITOR button is shown in Figure 31.

5.Press EXIT to close the PROTECTED SETUP page and return to the SETUP page in Editor mode.

Color Active-Matrix LCD Touch Panels Designing a Touch Panel Page 25