Power up message
Press POWER UP MESSAGE (Figure 118) to open the keyboard, and enter an ASCII string to be sent to the AXCESS Central Controller when the Touch Panel is powered up. The control system can be programmed to perform specific operations when the message is received. Refer to the AXCESS Programming section for detailed programming information.
Figure118
POWER UP MESSAGE
button
System page
Press the SYSTEM PAGE button (Figure 119) to open the SYSTEM page (Figure 120).
Figure119
SYSTEM PAGE button
Figure120
SYSTEM page
Warning
The System page should only be used to purge unwanted buttons, bitmaps, icons, fonts, and stored Touch Panel settings. Before using this page, make sure you have a backup copy of the Touch Panel program stored in the TPDesign 3 software program. If you press YES on any of the DELETE buttons, the stored data is permanently erased from the panel memory.
Color | Touch Panel Program Reference | 73 |
