AMX G3 manual Password, Calibrate

Figure115

AUTO ASSIGN button

Page password

Press the PAGE PASSWORD button (Figure 116) to open the keypad and assign a numeric page password to a specific page.

Figure116

PAGE PASSWORD button

Note

Press and hold for 2 seconds to enter the Test Calibration mode.

Figure117

CALIBRATE decision button

Note

The crosshair for calibration is first shown at the top-left corner of the Touch Panel screen.

If you try to open a password-protected page, the keypad appears, and you must enter the correct password number to open the new page. The page password range is 1 – 9,999.

∙CLEAR Clears the number in the keypad display.

∙ENTER Sets the page password number, closes the keypad, and returns to the PROTECTED SETUP page.

Calibrate

Press CALIBRATE to open the decision button shown in Figure 117, and reset the vertical and horizontal touch points on the LCD.

∙YES Starts the calibration process. Carefully press each crosshair that appears using your finger or dull pointer. When the calibration process is complete, press the screen to return to the PROTECTED SETUP page.

∙NO Cancels the calibration process.

72 Touch Panel Program Reference Color Active-Matrix LCD Touch Panels