Wireless settings (optional WAV-PKM)
The WIRELESS SETTINGS button appears on the SETUP page when a WAV-PK WavePack is connected to the Touch Panel. The WAV-PK provides wireless two- way RF spread-spectrum Touch Panel control and contains a lead-acid rechargeable battery that supplies independent power to the panel. Refer to the AXR-WAVES Server, WaveLink, Wireless Power Packs, Power Module AXR-WAVESWAV-CHGinstruction manual for detailed setup information Press the WIRELESS SETTINGS button to open the optional page shown in Figure 103.
Figure103
WAV-PK page
The Wave-Pack page shows the following information:
∙SLEEP TIMEOUT Press the UP and DN buttons to set the sleep time. The minimum sleep time is 0 (off) and maximum is 120 minutes. When the Touch Panel goes to sleep, all communication and battery discharge stops. If the sleep time is set to 5, the panel goes into sleep mode if there is no activity for 5 minutes. The Touch Panel automatically wakes up when you touch the screen for more than .5 seconds.
∙GROUP ID Sets the group ID number on the Touch Panel to communicate with the wireless AXR-WAVES with the same group ID number. The group ID range is 0–15. The group ID setting overrides the DIP switch setting on the WAV-PK.
64 | Touch Panel Program Reference | Color Active-Matrix LCD Touch Panels |
