AMX G3 manual Button String Commands, Button string commands

Figure197

Button string commands

Button String Commands

Figure 197 lists string commands you can assign to buttons using the Touch Panel editor. You select the PROPERTIES option in the Edit bar, press the target button, and enter the string command with the Touch Panel keyboard. Then, the string command is sent to the control system when you press the button. Refer to the Touch Panel Reference section for detailed editing information.

Button string commands

Command	Description
$ID<group ID number>	Assign a group ID to a button with a standard string.
	<group ID number> = 0 - 15
	Example:
	$ID15
	Sets the Touch Panel button group ID to 15.
'$SL'	Activate sleep mode on a wireless Touch Panel's wavepack.
	Example:
	$SL
	Activates sleep mode on the Touch Panel.
$ST<sleep time>	Set the time to activate sleep mode for a Touch Panel in
	1-minute increments. When the Touch Panel’s input time
	matches the sleep time, the panel goes to sleep.
	<sleep time> = 0 (off) - 150 minutes
	Example:
	$ST5
	Sets the sleep time to 5 minutes.
'$VI<interlace mode>'	Set the video-compatible Touch Panel to display composite
	video signal in an interlaced display format. Interlaced video
	refreshes the entire video display at specific time intervals.
	Non-interlaced video refreshes every other line of the video
	display at specific time intervals.
	<interlace mode > = 0 (off) or 1 (on)
	Example:
	$VI1
	Activates interlace mode on the video-compatible Touch
	Panel.

Color Active-Matrix LCD Touch Panels AXCESS Programming 141