AMX G3 manual Double beep, AXlink, serial number

Figure100

DOUBLE BEEP button

Note

You can override the beep value setting using the 'ABEEP' and 'ADBEEP' Send_Commands described in the AXCESS Programming section.

Figure101

AXlink, SERIAL #, and vX.XX button examples

∙HOUR Press the UP and DN buttons to set the hour.

∙MONTH Press the UP and DN buttons to set the month.

∙MIN Press the UP and DN buttons to set the minute.

∙DAY Press the UP and DN buttons to set the day.

∙SECOND Press the UP and DN buttons to set the seconds.

∙DISPLAY MONTH/DAY, DAY/MONTHPress to set the month and day display.

∙DISPLAY 12:00/24:00 Press to set the clock display to a 12- or 24-hour format. For example, the 12-hour clock format changes from 12:00 to 1:00, and the 24-hour clock changes from 12:00 to 13:00.

Double beep

Press the DOUBLE BEEP button (Figure 100) to toggle the double beep option on or off. The double beep sounds when you press the screen.

Set the BEEP button (described earlier) to 0 to disable the double-beep sound.

AXlink, serial number, and vX.XX

The AXlink, SERIAL #, and vX.XX buttons shown in Figure 101 are information buttons (display only).

The AXlink button is an AXCESS communication indicator that blinks once every second when the AXCESS Central Controller is connected to the Touch Panel. The

62 Touch Panel Program Reference Color Active-Matrix LCD Touch Panels