Installations | Panasonic WV-NM100 instruction

INSTALLATIONS

This is an example of an installation onto a wall.

Wall-mounting bracket

STEP1

Install the wall-mounting bracket onto the wall using the screws.

Screws

STEP2

Install the camera onto the wall-mounting brack- et by referring to the illustration shown on the left.

It is possible to install the camera upside down. Install the camera in the upside down position according to your needs.

STEP3

Confirm that the Panasonic logo is in the posi- tion shown in the illustration.

If the logo is upside down, rotate the logo.

Logo

Note

Logo

If the camera is placed on a desk, as shown in the illustra- tion on the right, select "Desk top" for "Camera position" on the "Basic setup" page.

11

Image 11

Panasonic WV-NM100 operating instructions Installations

Contents

Operating Instructions English Version Important Safety Instructions Contents Advanced Settings for Operation mode Preface Features Do not aim the camera at bright light sources Precautions MPEG-4 plug-in is exclusive to Internet Explorer Platform Trademarks and Registered Trademarks Rear View Inside of the connector coverFront View Installations Required cable ConnectionsConnection example LAN Using with an Intranet LAN Connection type Required hardware Using via the Internet Connection type Preparations for the Setup Setup Items included in the software Setup with the Provided Panasonic IP Setup Software Dhcp DNS Using Windows 98 SE Network Setup of the PC Screenshot Using Windows Screenshot Using Windows XP Category View Network Connections window appears Network Setup of the Camera Basic setup page appears Click the Advanced setup button WAN Connection type Description of the parameter Bootp Installation of the MPEG-4 Plug-in Basic Settings Camera position Power/Link/Access LEDCharacters for Camera name Up to 32 char Hour, minute and second Quality of image Browsing PicturesMonitoring a Still Picture of a Single Camera Image capture size One time pan Adjustment of the brightness of the picturePanning and tilting Image Size Monitoring the Motion Picture of a Single Camera Adjustment of the brightness of the motion picture Monitoring Still Pictures of Multiple Cameras Operation mode page of Advanced setup appears How to Operate Monitoring the Picture of a Camera in a Preset Position Browsing Pictures Saving the Currently Monitored Picture on the PC Motion Detector Function Action when Motion is Detected Inform by sending e-mails Detecting Motion in the Monitored Area Alarm type External alarm inputPre-alarm Post-alarm Setting of the Motion Detection Area Alarm page appears To view the previous or next picture automatically Viewing the Picture Stored in the Camera Transferring Pictures to the Server Mode Password Date & Time Non alarm transmission Check onDirectory File name Transferring Pictures to the Server when Motion is Detected Other Functions Alarm Connector and AUX Output ConnectorCustomizing the Contents of the Alarm Mail Advanced Settings for Operation mode Advanced Settings Refresh interval Operation mode selectionMPEG-4 mode setup Bandwidth control Adjusting the Picture PAN / Tilt calibration Hold Sharpness Settings for the Host Authentication Host address Access level Settings for the User Authentication Example admin System Settings NTP port Time adjustmentSynchronization with NTP server Time is adjust Time setup year-month-day hourminsec Default setting for Password Default setting for Host name WV-NM100 User nameDefault setting for User name Characters for Password Snmp Settings Community name Default setting for Community name public Equipment nameDefault setting for Equipment name Default setting for Location Firmware Upgrade Using Help Possible cause / Possible solution Troubleshooting If the camera and the PC are connected in a Different subnet If the camera and the PC are connected Same subnet If Internet Explorer is used If Netscape Communicator is used Camera Specifications Term Explanation Glossary of Terms Term N1102-1013 V8QA6036BN