Detecting Motion in the Monitored Area | Panasonic WV-NM100 guide

DETECTING MOTION IN THE MONITORED AREA

Screenshot 2

The "Operation mode" page of "Advanced setup" appears.

STEP2

Click the [Alarm&Transmission] button.

Screenshot 3

The "Alarm" page appears.

STEP3

Set the items on the "Alarm" page.

Refer to the next page for details about each item.

STEP4

Click the [SET] button after completing the set- ting.

44

Image 44

Panasonic WV-NM100 operating instructions Detecting Motion in the Monitored Area

Contents

Operating Instructions English Version Important Safety Instructions Contents Advanced Settings for Operation mode Features Preface Precautions Do not aim the camera at bright light sources Platform MPEG-4 plug-in is exclusive to Internet Explorer Trademarks and Registered Trademarks Rear View Inside of the connector coverFront View Installations Required cable ConnectionsConnection example Using with an Intranet LAN Connection type LAN Using via the Internet Connection type Required hardware Setup Preparations for the Setup Setup with the Provided Panasonic IP Setup Software Items included in the software Dhcp DNS Network Setup of the PC Using Windows 98 SE Screenshot Using Windows Screenshot Using Windows XP Category View Network Connections window appears Network Setup of the Camera Basic setup page appears Click the Advanced setup button WAN Connection type Description of the parameter Bootp Installation of the MPEG-4 Plug-in Basic Settings Power/Link/Access LED Characters for Camera name Up to 32 charHour, minute and second Camera position Browsing Pictures Monitoring a Still Picture of a Single CameraImage capture size Quality of image Adjustment of the brightness of the picture Panning and tiltingImage Size One time pan Monitoring the Motion Picture of a Single Camera Adjustment of the brightness of the motion picture Monitoring Still Pictures of Multiple Cameras Operation mode page of Advanced setup appears How to Operate Monitoring the Picture of a Camera in a Preset Position Browsing Pictures Saving the Currently Monitored Picture on the PC Action when Motion is Detected Motion Detector Function Inform by sending e-mails Detecting Motion in the Monitored Area External alarm input Pre-alarmPost-alarm Alarm type Setting of the Motion Detection Area Alarm page appears Viewing the Picture Stored in the Camera To view the previous or next picture automatically Transferring Pictures to the Server Password Mode Non alarm transmission Check on DirectoryFile name Date & Time Transferring Pictures to the Server when Motion is Detected Other Functions Alarm Connector and AUX Output ConnectorCustomizing the Contents of the Alarm Mail Advanced Settings Advanced Settings for Operation mode Operation mode selection MPEG-4 mode setupBandwidth control Refresh interval Adjusting the Picture Hold Sharpness PAN / Tilt calibration Settings for the Host Authentication Access level Host address Settings for the User Authentication Example admin System Settings Time adjustment Synchronization with NTP server Time is adjustTime setup year-month-day hourminsec NTP port Default setting for Host name WV-NM100 User name Default setting for User nameCharacters for Password Default setting for Password Snmp Settings Default setting for Community name public Equipment name Default setting for Equipment nameDefault setting for Location Community name Using Help Firmware Upgrade Troubleshooting Possible cause / Possible solution If the camera and the PC are connected Same subnet If the camera and the PC are connected in a Different subnet If Netscape Communicator is used If Internet Explorer is used Specifications Camera Glossary of Terms Term Explanation Term N1102-1013 V8QA6036BN