DETECTING MOTION IN THE MONITORED AREA

Setting of the Motion Detection Area

Set the area where motion has to be detected. You can set up to four areas. The setting can be made on the "VMD area" page of "Alarm&Transmission".

Screenshot 1

Begin the operation from the "Basic setup" page.

Refer to page 24 and 25 to display the "Basic setup" page.

STEP1

Click the [Advanced setup] button.

Screenshot 2

The "Operation mode" page of "Advanced setup" appears.

STEP2

Click the [Alarm&Transmission] button.

46

Page 46
Image 46
Panasonic WV-NM100 operating instructions Setting of the Motion Detection Area