System Settings | Panasonic WV-NM100 specification

ADVANCED SETTINGS

System Settings

Begin the setting for the system such as date setting, naming the cameras, etc. The setting is made on the "System" page.

Screenshot 1

Begin the operation from the "Basic setup" page.

Refer to page 24 and 25 to display the "Basic setup" page.

STEP1

Click the [Advanced setup] button.

Screenshot 2

The "Operation mode" page of "Advanced setup" appears.

STEP2

Click the [System] button.

62

Image 62

Panasonic WV-NM100 operating instructions System Settings

Contents

Operating Instructions English Version Important Safety Instructions Contents Advanced Settings for Operation mode Features Preface Precautions Do not aim the camera at bright light sources Platform MPEG-4 plug-in is exclusive to Internet Explorer Trademarks and Registered Trademarks Rear View Inside of the connector coverFront View Installations Required cable ConnectionsConnection example Using with an Intranet LAN Connection type LAN Using via the Internet Connection type Required hardware Setup Preparations for the Setup Setup with the Provided Panasonic IP Setup Software Items included in the software Dhcp DNS Network Setup of the PC Using Windows 98 SE Screenshot Using Windows Screenshot Using Windows XP Category View Network Connections window appears Network Setup of the Camera Basic setup page appears Click the Advanced setup button WAN Connection type Description of the parameter Bootp Installation of the MPEG-4 Plug-in Basic Settings Hour, minute and second Power/Link/Access LEDCharacters for Camera name Up to 32 char Camera position Image capture size Browsing PicturesMonitoring a Still Picture of a Single Camera Quality of image Image Size Adjustment of the brightness of the picturePanning and tilting One time pan Monitoring the Motion Picture of a Single Camera Adjustment of the brightness of the motion picture Monitoring Still Pictures of Multiple Cameras Operation mode page of Advanced setup appears How to Operate Monitoring the Picture of a Camera in a Preset Position Browsing Pictures Saving the Currently Monitored Picture on the PC Action when Motion is Detected Motion Detector Function Inform by sending e-mails Detecting Motion in the Monitored Area Post-alarm External alarm inputPre-alarm Alarm type Setting of the Motion Detection Area Alarm page appears Viewing the Picture Stored in the Camera To view the previous or next picture automatically Transferring Pictures to the Server Password Mode File name Non alarm transmission Check onDirectory Date & Time Transferring Pictures to the Server when Motion is Detected Other Functions Alarm Connector and AUX Output ConnectorCustomizing the Contents of the Alarm Mail Advanced Settings Advanced Settings for Operation mode Bandwidth control Operation mode selectionMPEG-4 mode setup Refresh interval Adjusting the Picture Hold Sharpness PAN / Tilt calibration Settings for the Host Authentication Access level Host address Settings for the User Authentication Example admin System Settings Time setup year-month-day hourminsec Time adjustmentSynchronization with NTP server Time is adjust NTP port Characters for Password Default setting for Host name WV-NM100 User nameDefault setting for User name Default setting for Password Snmp Settings Default setting for Location Default setting for Community name public Equipment nameDefault setting for Equipment name Community name Using Help Firmware Upgrade Troubleshooting Possible cause / Possible solution If the camera and the PC are connected Same subnet If the camera and the PC are connected in a Different subnet If Netscape Communicator is used If Internet Explorer is used Specifications Camera Glossary of Terms Term Explanation Term N1102-1013 V8QA6036BN