Screenshot 3
The [Host authentication] tab appears.
Screenshot 4
The "User authentication" page appears.
STEP3
Click the [User authentication] tab.
STEP4
Begin the setting for the user authentication. "User authentication"
Select "ON" or "OFF" to set whether to authenti- cate users or not.
"User name"
Enter a user name of up to 32 characters. "Password" / "Retype Password"
Enter a password for the user of at least 8 and no more than 32 characters.
"Access level"
Select an access level from the following: Administrator / Camera control / Live viewing
"Administrator": Authorized to operate all functions of the camera
"Camera control": Authorized to monitor the picture and operate on the "Alarm log list" page and the "Camera control" page. Not authorized to operate on the "Basic setup" page and the "Advanced setup" page.
"Live viewing": Authorized only to monitor the picture. Not authorized to operate the camera.
STEP5
Click the [SET] button after completing the set- ting.
Click the "Delete User" [o] button to check the users registered in the user authentication. You can delete the selected user by clicking the [DEL] button below. Access level, which is sur- rounded by “[ ]”, will appear beside the user name registered.
Example: admin [1]
61
