Screenshot 3
The "Network" window appears.
STEP3
Click the [Configuration] tab.
STEP4
Click to select the TCP/IP protocol of the cur- rently used network card.
STEP5
Click the [Properties] button.
Note
If the “TCP/IP” item is not displayed, refer to the operating instructions of the OS and follow the procedures to install the TCP/IP.
Screenshot 4
The "TCP/IP Properties" window appears.
STEP6
Click the [IP Address] tab.
STEP7
Click the "Specify an IP address" radio button.
STEP8
Enter the IP address and the subnet mask as
follows. |
| |
• | IP Address: | 192.168.0.9 |
• | Subnet Mask: | 255.255.255.0 |
STEP9
Click the [OK] button, and the window closes.
STEP10
Restart the PC to make the IP address valid.
19
