MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
Front View
Dome cover
Power LED
You can select ON or OFF for the LED on the “System” page. (Refer to page 63.)
Rear View
Connector cover
To detach the connector cover, hold down
the 
part and slide it.
Alarm connector
Power plug connector
(Only use the AC adapter supplied)
Ethernet connector
Link LED (Lights up when communication with connected devices becomes possible.)
Access LED (Lights up when accessing to the network.)
Inside of the connector cover
! Important
Firmly insert the power plug of the AC adapter into the power plug connector of the camera.
HTML document initialization switch
All HTML documents return to the default settings (to the default settings of the latest upgraded firmware if the firmware has been upgraded) when the AC adapter is plugged into an outlet while this switch is pressed and kept pressed for five seconds or more after the plug is inserted.
Note:
It will take around 5 minutes to initialize all HTML documents. The power LED blinks during the initialization. It changes to steady light after the initialization has been completed.
Setting reset switch
All settings return to the default settings when the AC adapter is plugged into an outlet while this switch is pressed and kept pressed for five seconds or more after the plug is inserted.
10
