Screenshot 2
The setup window appears.
STEP4
Set parameters for each item. "IP Address"
"Subnet Mask" "Default Gateway" "HTTP Port"
Enter parameters depending on your environ- ment.
For further information about the parameters, refer to pages
"DHCP"
"DNS"
Click the [Enable] radio button when using the DHCP and the DNS.
When using the DNS function, enter the “Primary DNS Server address” and the “Secondary DNS Server address”.
Notes
• If DHCP is enabled although there is no DHCP server in the network, check “Disable” for DHCP in the “Panasonic IP Setup” window.
• If DHCP is enabled, and the DHCP server has not assigned an IP address yet, “0.0.0.0” is displayed for the IP address. The IP address of the camera will be displayed after the DHCP server assigns one to the camera.
STEP5
Click the [SET] button after completing the set- ting.
! Important
It takes around 20 seconds to complete the settings of the camera after the [SET] button is pressed. If the AC adapter or the Ethernet cable is detached before the settings are com- pleted, the settings may not be performed cor- rectly.
17
