SETUP
Screenshot 6
The "Network" page appears.
STEP6
Set parameters for each item in the "Network" page.
The parameters differ depending on the con- nection type (refer to pages
For further information, refer to the next page.
STEP7
Click the [SET] button after completing the setup.
! Important
After you click the [SET] button, the “Command Executing” message appears. (This message will appear even when you click the [SET] button in other windows.) Avoid doing any operation while the message is displayed.
Note
•About the address translation function (Static IP masquerade, Network Address Translation (NAT))
The address translation function changes a global IP address to a private IP address, and “Static IP masquer- ade” and “Network Address Translation (NAT)” have this function. This function is to be set in a router.
To browse camera pictures via the Internet by connecting the camera to a broadband router, it is necessary to assign a respective port number for each camera and address translation by using the address translation func- tion. For further information, refer to the operating instructions of the broadband router.
| Broadband router |
|
Global address | Private address | |
for the WAN | for the LAN | |
vvv.xxx.yyy.zzz | 192.168.0.254 | |
Enter [Global IP address + : (colon) + port number] |
|
|
in the “Address” box of the browser via the Internet. |
|
|
vvv.xxx.yyy.zzz:82 |
|
|
vvv.xxx.yyy.zzz:81 | Address translation |
|
| vvv.xxx.yyy.zzz:82 → | 192.168.0.2:82 |
Internet |
| Private address |
| 192.168.0.2 | |
(WAN) |
| |
| Port number: 82 | |
| Address translation | |
Cable modem or |
| |
xDSL modem | vvv.xxx.yyy.zzz:81 → | 192.168.0.1:81 |
|
| Private address |
|
| 192.168.0.1 |
|
| Port number: 81 |
26
