TRANSFERRING PICTURES TO THE SERVER
Transferring Pictures to the Server when Motion is Detected
Set for the pictures of the motion detection area to be transferred to the server when motion is detected by the motion detector function. The settings can be made on the "FTP client" page of "Alarm&Transmission". Refer to page 49 and 50 to display the "FTP client" page of "Alarm&Transmission".
STEP1
Set the items for "Alarm transmission setup". "Alarm transmission"
Check "ON".
You can select "ON" or "OFF" to set whether to transfer the pictures or not when an alarm occurs.
"Directory"
Enter the directory where the pictures should be stored.
"File name"
The file name to be transferred will be [File name (name of the picture entered by the user) + sequential number + month / day / hours / minutes / seconds / year].
The sequential number will be given automati- cally starting from 1.
! Important
The total number of characters of the directory name and the file name should not exceed 255.
STEP2
Click the [SET] button after completing the set- ting.
52
