Heat Controller DMC12SB-0 To remove the Control Box, To remove the Discharge Grille, Disassembly

	Disassembly
2. To remove the Control Box.
•	Remove securing screws.
•	Pull the control box out from the chassis
	carefully.
	Screw

3.To remove the Discharge Grille.

•Unhook the discharge grille and pull the discharge grille out from the chassis carefully.

4.To remove the Evaporator.

•Remove 3 screws securing the evaporator(at the left 2EA in the Eva Holder, at the right 1EA).

•When repair, do not damage the Caution label.

Service Manual 41