Rockford Fosgate RFX9110, RFX9210G, RFX9210R manual Programmable Disc Title Memory Model 9210 Only

OPERATION – CD PLAYER

CD Changer Mode

1.Press the MODE button until CDX PLAY is displayed.

2.The CD changer will immediately begin playing track #1 of the first available disc.

3.If the changer was previously initialized, the changer will resume playing the last track initialized.

Disc Selection

1.Press the PRESET 5–UP button to select the next disc in the magazine.

2.Press the PRESET 4–DOWN button to select the previous disc in the magazine.

3.Press the D-ACC (PTY–DISC-ACC) button and numbers 1-8 for direct disc access.

Panel Display

While playing a disc the panel will display the track number and the time played, also the disc number, unless the default has been change to TITLE DEFAULT and a disc title has been programmed in. See PANEL DISPLAY DEFAULT in

OPERATION-BASIC.

NOTE: When the last track # on the current disc is reached, the next disc will load and begin playing track #1.

Remote

Remote

OPERATION – TITLE PROGRAMMING

Programmable Disc Title Memory (Model 9210 Only)

NOTE: A maximum total of 100 titles can be programmed into the unit.

The name of a Station, CD or AUX1 channel can be stored in memory using up to 10 characters as a title.

Title Memory

1.Select the mode you are going to be titling, (Tuner, CDP, CDX or AUX1). If in tuner mode, select the station to be titled.

NOTE: The disc to be titled must be in the unit, either in CDP or CDX, and selected.

2.Press and hold the BAND button for 1 second and the first digit of the 10-digit front panel will begin to blink.

3.Press the DISP button to cycle through the following character types:

Type 1: (space)ABCDEFGHIJKLMNOPQRSTUVWXYZ

Type 2: abcdefghijklmnopqrstuvwxyz

Type 3: 0123456789

Type 4: /\\.+?!*’")

17