OPERATION – TUNER
SELECTING A STATION
Press the Up or Down Button (SEEK 
or 
) once and the Tuner will rapidly proceed to the next (UP) or pervious (DOWN) station.
Press and holding either the Up or Down button (SEEK 
or 
) for 1 second will put you into TUNER
MANUAL mode. You can now manually search up or down at a rate of one digit per click (pressing and holding the Up or Down button will allow rapid searching).
PRESET BUTTONS
Remote
Each Tuner
To Set a Preset Button
1.Tune the Tuner to the station you wish to program.
2.Press and hold any preset button (1 to 0) for five seconds and it will program that setting. Works with remote as well.
AUTO STORE | Remote |
|
If you want the Tuner to select the 10 most powerful stations in order of their signal strength and assign them to Preset buttons 1 to 0, you can use Auto Store.
1. Press and the AS button and the Tuner will scan the entire dial.
2. Auto Store will store radio stations independently in the selected tuner bank (FM1/FM2/AM).
PROGRAMMING STATION TITLES
The name of a Station can be stored in memory using up to 10 characters as a title.
See PROGRAMMING TITLES at the end of the
Available on International R.D.S. Models Only
AF/TP MODE
TP (Traffic Program) Mode will automatically switch to receive a Traffic Announcement regardless of the current operating mode of the unit. EON TA are stations that do not have a TRAFFIC PROGRAM but can provide information on other radio stations that do.
AF (Alternative Frequencies) Mode compares the signal level of the current station with the signal level of other alternative frequencies on the same radio network (see PTY Mode). If the AF provides a stronger signal than the current frequency, the radio will switch to the stronger AF.
Traffic Program Mode (TP)
1.Press the AF/TP button to engage TP Mode, and again to disengage TP Mode.
2.When TP is blinking, TP Mode is on and there is no TP DATA to receive.
3.The SEEK or AS function will stop only at radio stations providing TP or EON TA.
Alternative Frequencies Mode (AF)
1.Press and hold the AF/TP button for 1 second to engage AF Mode.
2.Press and hold AF/TP again for 1 second to disengage AF Mode.
13
