Rockford Fosgate X150.1 Specifications, Model, Peak Power Rating - Measured at 14.4 Volts, Punch

SPECIFICATIONS

MODEL	PUNCH X150.1
Peak Power Rating - Measured at 14.4 Volts
Mono into a 2Ω Load	400	Watts
Dynamic Power Rating (IHF-202 Standard) - Measured at 14.4 Volts
Mono into a 4Ω Load	110 Watts
Mono into a 2Ω Load	190	Watts
Continuous Power Rating (Competition Standard) - Measured at 13.8 Battery Volts
RMS continuous power mono, driven into a	75	Watts
4Ω load from 20 to 20,000Hz with less than
0.05% Total Harmonic Distortion (THD)
RMS continuous power mono, driven into a	150	Watts
2Ω load from 20 to 20,000Hz, with less than
0.1% Total Harmonic Distortion (THD)
Signal-to-Noise Ratio	>100dB A-weighted
Crossover Slope	24dB/octave Butterworth
Crossover Frequency	variable from 50Hz to 250Hz
Dimensions	2.60" (6.60cm) H
	9.60" (24.38cm) W
	6.70" (17.01cm) L

Frequency Response

Bandwidth

Damping Factor @ 4Ω (at output connector )

Slew Rate

IM Distortion (IHF)

Source Unit Compatibility (+15dB gain overlap)

Input Sensitivity (+0dB gain overlap)

Protection

Battery Fusing Rates (External to Amplifier)

Fuse Type

Equalization (45Hz Punch Bass)

Input Impedance

20Hz to 20kHz ±0.5dB

10Hz to 200kHz ±3dB

>200

30Volts/ms

<0.05%

17V max. (low level in)

Variable from 250mV to 4V (low level in)

Variable from 650mV to 11V (high level in)

NOMAD - Internal analog-computer output protection circuitry limits power in case of overload. Thermal switch shuts down the amplifier in case of overheating.

15amps

ATC

Variable from 0dB to +18dB @ 45Hz

20k ohms

Specifications subject to change without notice

10