Roksan Audio LIII G U A R A N T E E, Specifications, K a n d y Integrated Amplifier, Page 10 of

G U A R A N T E E K a n d y Integrated Amplifier

There are no user-serviceable parts inside your Kandy Integrated Amplifier. If a fault should develop, refer any servicing to your appointed ROKSAN dealer, distributor or ROKSAN approved service agent.

Your ROKSAN Kandy Integrated Amplifier is guaranteed against any defect in materials and workmanship for a period of two years from the date of purchase.

This guarantee only becomes effective if the warranty card is validated by the ROKSAN retailer from whom the equipment was purchased and returned to ROKSAN within 28 days of purchase.

This guarantee excludes:

1.Damage caused due to accident, missuse, neglect and incorrect installation, adjustment or repair.

2.Liability for damage or loss during transit from the retailer or purchaser to ROKSAN or its authorised distributor for the purposes of repair or inspection.

Carriage costs to ROKSAN shall be borne by the consignor.

All claims under this guarantee must be made through an authorised ROKSAN retailer.

If equipment returned for repair to ROKSAN is found on inspection to comply with the product specification ROKSAN reserves the right to make a charge for examination and return carriage.

Unauthorised servicing will void this guarantee.

SPECIFICATIONS	K a n d y Integrated Amplifier
Inputs	Line Level (x5), Moving Magnet (x1), Tape (x1)
Input Impedance	47 kΩ
Input Sensitivity (115W)	Line 470mV
Outputs	Speaker L & R (x1), Preamplifier (x2), Tape (x1), Headphone (x1)
Output Power	>120 Watts, into 8Ω
	both channels driven
	>185 Watts, into 4Ω
	both channels driven
Power Supply	500VA Ultra Low Noise Toroidal Transformer
	4 Regulated Supply Rails
Damping Factor	>110 (8Ω)
Frequency response	(-3dB), <3Hz – >100kHz
Gain	38dB Overall (Pre & Power)
	7dB Preamplifier
	31dB Power Amplifier
Harmonic Distortion	<0.005% 1kHz - 8Ω
Signal to Noise Ratio	Line 100dBa (ref 470mV)
Power Source	100V – 120V 50Hz / 60Hz
	220V – 240V 50Hz / 60Hz
Power Consumption	Standby <25W, Full Power 2-CH 8Ω < 330 W, 4Ω <550W
Dimension	432 x 380 x 90 (W x D x H) mm
	432 x 380 x 102 (including feet)
Weight	14 Kg
Roksan Audio ltd	Kandy Integrated Amplifier User Manual
CLASSIFICATION: General Use	Version 3.3

All specifications are liable to change without notice. E&OE Page 10 of 11 ENGLISH