The Tape Monitor is an override. Pressing the TAPE Button (12) connects the output of your tape deck to the Kandy, overriding the selected input. However, the selected input is left connected to the recording input of your tape deck. If you have a suitable tape deck, this facility enables you to record a programme whilst monitoring its playback.
When the TAPE Button is depressed, the TAPE Indicator light (11) glows and the selected source Indicator remains illuminated.
The input selector remains functional when the Tape Monitor is ON, allowing a range of sources to be recorded. Pressing the TAPE Button toggles between Tape Monitor ON and OFF.
REMOTE HANDSET
The Kandy Integrated Amplifier MKIII Remote Handset uses two AA size 1.5V batteries. These are housed in the battery compartment on the underside of the handset.
Carefully remove the battery compartment cover and insert the supplied batteries in place observing polarity. Replace the cover. The handset is now ready for use.
The front panel controls of the Kandy Integrated Amplifier are replicated on the remote handset.
3
7
8
1 TAPE
2 POWER
3 MODE
4 MUTE
5 VOLUME (+)
6 VOLUME
7 INPUT(FORWARD)
8 INPUT (BACK)
2
4
5
6
1
1The TAPE Button (1) connects the Tape Deck In and Out.
2The POWER Button (2) puts the amplifier in and out of Standby. (MODE light GREEN and RED)
3The MODE Button (3) mutes and
4The MUTE Button (4) fully mutes and
7, 8 The INPUT Buttons (7 & 8) march through the input sources (Forward & Back).
Roksan Audio ltd | Kandy Integrated Amplifier User Manual |
CLASSIFICATION: General Use | Version 3.3 |
All specifications are liable to change without notice. E&OE | Page 8 of 11 | ENGLISH |
