62
63
4. Key 1 is the default key used by SoundBridge. In this example, 49774B692D is the key
value.
This is your Wi-Fi network password.
5. Close your web browser.
Netgear WG602
The Netgear WG602 is an 802.11g Wi-Fi Access Point. Its configuration can be accessed with a
web browser.
1. Open a web browser and connect to the access point by entering the access point’s IP
address in the location bar of your web browser. If you do not know the IP address of
the access point, please refer to the software or manual that came with the access po int
in order to determine the IP address. After successfully logging in, you wil l see a page
similar to the following:
11
Section 11: Appendices Section 11: Appendices