64
65
2. Note the value of “Wi-Fi Network Name (SSID) ”.
3. Click “Security Settings” on the left side to access the WEP set tings. If “WEP” is set to
“Enable” (as below), you will need to obtain the hexa decimal key for your network.
Netgear unfortunately, does not allow you to view the current WEP key. However, if you re-
enter the known passphrase and press “Generate Keys,” then it will regenerate the keys as
before and allow you to view them:
4. Make a note of the value of the key with the active radio button (the default key, in this
case “Key 1”: “562E7FF0A0”). This is the password that you will need to enter into your
SoundBridge’s Wi-Fi setup “Password” field.
5. Close your web browser.
Customer Support If you are having trouble setting up the SoundBridge, please browse our o nline support
resources at www.rokulabs.com/support There you w ill find troubleshooting documents and
an active forum topic dedicated to “SoundBridge Set-up”. Check to see if other users have
posted information that pertains to your situation. Our Forum is monitored by R oku engineers
and by our customer support staff. If those options fail, ple ase send an email to Customer
Support. 11
Section 11: Appendices Section 11: Appendices