20
Creating a new Style
By using this function, events of the specified data type in the
specified region and specified range of pitches can be shifted
forward or backward.
1. In the “Style Edit Menu,” select “10. Shift Clock” and press
[ENTER].
The STYLE EDIT SHIFT CLOCK screen will appear.
2. Use [ ] [ ] [ ] [ ] to move the cursor to the
parameter you want to change, and use the VALUE dial to
make the desired setting.
3. Select “EXECUTE” and then press [ENTER].
It is not possible to restore the data to its original state after
executing this operation.
This function changes the length of a Style part.
1. In the “Style Edit Menu,” select “11. Style Part Length” and
press [ENTER].
The STYLE EDIT STYLE PART LENGTH screen will appear.
2. Use [ ] [ ] [ ] [ ] to move the cursor to the
parameter you want to change, and use the VALUE dial to
make the desired setting.
3. Select “EXECUTE” and then press [ENTER].
It is not possible to restore the data to its original state after
executing this operation.
Making fine adjustments to the timing (Shift Clock)Parameter Value Explanation
PART ADrum, ABass,
Acc1–6, ALL
Selects the Style part
whose timing is to be
shifted.
CHORD Maj, min, 7th Selects the chord.
DIVISION
INT1–4,
MAIN1–4,
FILL1–4,
END1–4
Selects the division.
From
(MEAS:
BEAT: TICK) 0001: 01: 000– Specifies the beginning
of the region to be
shifted.
To (MEAS:
BEAT: TICK) 0001: 01: 000– Specifies the end of the
region to be shifted.
Data Type
ALL, NOTE,
MODULATION,
PANPOT,
EXPRESSION,
REVERB,
CHORUS, PC,
PITCH BEND
Specifies the type of data
to be shifted.
Value
(TICK) -4800–4800
(TICK) Specifies the amount of
shift in units of a tick.
Note
Range Min C–(Note Range
Max value)
Specifies the lowest pitch
whose position is to be
shifted.
Note
Range Max (Note Range
Min value)–G9
Specifies the highest
pitch whose position is to
be shifted.
Changing the length of each part (Style Part Length)Parameter Value Explanation
PART ADrum, ABass,
Acc1–6, ALL
Selects the Style part
whose length you want
to change.
DIVISION
INT1–4,
MAIN1–4,
FILL1–4,
END1–4
Selects the division.
CHORD SW
(Major,
minor, 7th) OFF, ON
You may select more
than one chord.
*You can’t execute the
function if nothing is
selected here.
Length
(MEAS:
BEAT: TICK) 0000: 00: 000– Specifies the length of
the Style.
Prelude_OM_Ver2.book Page 20 Wednesday, September 9, 2009 5:38 PM