43
Other added functions
The “STYLE FINDER” screen lets you sort the listed Styles in
order of number, name, or tempo.
This lets you quickly find the desired one of a large number of
Styles.
1. Press [STYLE].
Start playback and press [STYLE] so it’s lit if you want to
hear the chordal accompaniment, or turn it off (unlit) if you
want only the rhythm to be heard. The button will alternate
between lit and extinguished each time you press [STYLE].
2. Use [ ] [ ] [ ] [ ] to move the cursor to the
Style number in the screen, and press [ENTER].
The STYLE LIST screen will appear.
3. Press [MENU].
The STYLE FINDER screen will appear.
You can use the [0]–[2] buttons to sort the list in the
following ways.
An “→” is shown beside the current sorting order, with
to indicate ascending order or to indicate descending
order.
4. Press [ENTER] to confirm your choice of Style.
You will return to the Main screen.
If you press [EXIT], you’ll return to the STYLE LIST screen
without changing the Style.

(Owner’s Manual p. 45)

In the System Pedal setting, you can now assign BEND MODE
to the pedal.
1. Press [MENU].
2. Press [ENTER].
3. Use [ ] [ ] to select the SYSTEM PEDAL screen, and
use [ ] [ ] to select the parameter that you want to
edit.
4. Turn the VALUE dial to edit the value.
When you’re finished making system settings, press [EXIT].

STYLE FINDER

Function Explanation
[0] (NUMBER) Numerical order Press the button
again to alternate
between ascending
and descending
order.
[1] (NAME) Alphabetical order
[2] (TEMPO) Tempo order

SYSTEM PEDAL

Parameter Value Explanation
Pedal
Assign
EXPRESSION
Refer to the owner’s manual
p. 45
*The function of using the
pedal to Punch In/Out is
available only when
you’re realtime recording
with the Song Track
screen displayed.
CHORD OFF
CHORD TOGGLE
SOSTENUTO
SOFT
ROTARY SLOW/
FAST
START/STOP
BASS INVERSION
PUNCH IN/OUT
FILL UP
FILL DOWN
PERFORM UP
PERFORM
DOWN
BEND MODE
The BEND MODE
(NORMAL, CATCH+LAST)
will change each time you
press the pedal.
NORMAL: The pitch bend lever will
operate in the conventional way.
CATCH+LAST: If you play a note
after moving the pitch bend lever to
one side, the new note’s pitch
corresponds to the key you press.
When the lever passes through the
center position, it will once again
begin affecting the pitch. This
applies only to the most recently
played note. You could use this to
simulate the double-bending
technique of an electric guitarist.
Prelude_OM_Ver2.book Page 43 Wednesday, September 9, 2009 5:38 PM