37
Creating a new song
It is not possible to restore the data to its original state after
executing this operation.
This function modifies the durations of the notes in the
specified region.
1. In the “Song Edit Menu,” select “8. Change Gate Time”
and press [ENTER].
The SONG EDIT CHANGE GATE TIME screen will
appear.
2. Use [ ] [ ] [ ] [ ] to move the cursor to the
parameter that you want to change, and use the VALUE
dial to make the desired settings.
3. Select “EXECUTE” and then press [ENTER].
It is not possible to restore the data to its original state after
executing this operation.
This function replaces the specified MSB, LSB, and PC values
with different MSB, LSB, and PC values. You can also apply a
relative adjustment to the control values (Expression, Panpot,
Reverb, Chorus) within the Song.
1. In the “Song Edit Menu,” select “9. Global Change” and
press [ENTER].
The SONG EDIT GLOBAL CHANGE screen will appear.
2. Use [ ] [ ] [ ] [ ] to move the cursor to the
parameter that you want to change, and use the VALUE
dial to make the desired settings.
Modifying the note durations (Change Gate Time)Parameter Value Explanation
Part ALL, 1–16 Selects the Song part whose
gate times are to modified.
From (MEAS:
BEAT: TICK) 0001: 01:
000–
Specifies the beginning of
the region whose gate times
are to be modified.
To (MEAS:
BEAT: TICK) 0001: 01:
000–
Specifies the end of the
region whose gate times
are to be modified.
Bias (TICK) -4800–
4800 (TICK)
Specifies the amount by
which the gate times are to
be modified, in units of a
tick.
Magnify 0–200% Specifies the ratio by which
the gate times will be
modified.
Note Range
Min
C–(Note
Range Max
value)
Specifies the lowest pitch
whose gate times are to be
modified.
Note Range
Max
(Note Range
Min value)–
G9
Specifies the highest pitch
whose gate times are to be
modified.
Replacing performance data (Global Change)Parameter Value Explanation
Part ALL, 1–16 Selects the Song part whose
data values you want to
modify.
MSB
(FROM) OFF,
0–127, ALL
Specifies the MSB value that
will be changed.
By choosing ALL, you can set
more than one Song part to
the same value.
MSB (TO) OFF, 0–127 Specifies the new MSB value.
LSB (FROM) OFF,
0–127, ALL
Specifies the LSB value that is
to be changed.
By choosing ALL, you can set
more than one Song part to
the same value.
LSB (TO) OFF, 0–127 Specifies the new LSB value.
PC (FROM) OFF,
1–128, ALL
Specifies the PC value that is
to be changed.
By choosing ALL, you can set
more than one Song part to
the same value.
PC (TO) OFF, 1–128 Specifies the new PC value.
VOLUME -127–127 Adjusts the Volume values.
EXPRESS -127–127 Adjusts the Expression
values.
PANPOT -127–127 Adjusts the Panpot values.
REVERB -127–127 Adjusts the Reverb values.
CHORUS -127–127 Adjusts the Chorus values.
Prelude_OM_Ver2.book Page 37 Wednesday, September 9, 2009 5:38 PM