the Vector rendering intent field will be applied to vector images in your file. Choose from one of the following rendering intents:

Perceptual

This intent is best for photographic images. Colors outside of the output device's gamut are either clipped or compressed to fit the output device’s color space

Relative Colorimetric

This intent is best for images, such as logos, where the original image needs to match the output. Colors that fall outside of the output device's gamut are clipped. This method may reduce the total number of colors available. The white point of Relative Colorimetric is always zero.

Saturation

This intent is best for graphic images, such as vector art, where vivid colors are more important than true color matching. Colors outside of the output device's gamut are mapped to colors at the extent of the gamut's saturation. Color's that fall within the gamut of the output device are shifted closer to the gamut's saturation extent. This rendering intent may also be used to boost colors within a photographic image.

Absolute Colorimetric

This intent is similar to Relative Colorimetric, but has a different white point value. Absolute Colorimetric represents colors relative to a fixed white point value of D50. For example, the white of paper A will be simulated when printing on paper B. This intent is best for color proofing.

Spot Color

This intent is was created to supplement the Saturation intent. Spot Color maps colors similarly to the Saturation rendering intent, but Spot Color rendering intent produces the greatest saturation possible, and should not be used with photographic images.

Color Mode

If your output device supports multiple color modes, then you can select one of the supported color modes here.

The Setup Properties Cut Tab

The Cut tab displays cut settings.

Resolution

This display is fixed at 1,016.

Passes

Specify how many times the blade will move over each line.

Curve Quality

Select how smooth you would like the curves to be.

Cutter Driver Options (ColorCAMM PC-12)

Clicking this button launches the Cutter Driver Options dialog box, shown below.

Custom Head Tab

Recommendation Cut

This specifies the cutting conditions.

25