14.Click Print.
Illustrator 8.0 [Windows]
The Kodak Color Management System must be installed to output successfully from Illustrator 8 to Roland ColorChoice Software.
1.From the Roland ColorChoice Print Monitor click Setup>Setup Properties. Then click the Print tab.
2.Make sure the Perform Color Correction check box has a check in it.
3.Click OK in the Setup Properties dialog.
4.In Illustrator, go to File>Document Setup.
5.Select ‘Use printers default screen.’
6.Select ‘Use Print Setup’.
7.Click the Print Setup button. Print Setup screen appears.
8.Select your printer in the Name field.
9.Click the Properties button.
10.Choose a paper size from the ‘Paper’ field or select a Custom page for a custom page size.
11.If you choose a custom page size, you may enter the custom size by clicking the Custom button and entering the width and height.
12.If you choose custom page, click OK to Custom Defined Size dialog.
13.Click OK in the Properties dialog.
14.Click OK in the Print Setup dialog.
15.Click OK in the Document Setup dialog.
16.If you want your monitor to
17.Go to File>Print.
18.If not dimmed, set Output to Composite.
19.Set PostScript to Level 3.
20.Check Force Fonts to Download.
21.Click OK to print.
Illustrator 9.0 [Windows]
The Kodak Color Management System must be installed to output successfully from Illustrator 8 to Roland ColorChoice Software.
1.From the Roland ColorChoice Print Monitor click Setup>Setup Properties. Then click the Print tab.
2.Make sure the Perform Color Correction check box has a check in it. Also, if you're using the transparency feature of Illustrator 9.0 or the like (described later in this document), we recommend setting "Bitmap rendering intent" and "Vector rendering intent" to the same value. Color stitching may occur if the settings are different. (For more information about color stitching, refer to "The Transparency Feature of Illustrator 9.0" later in this document.)
3.Click OK in the Setup Properties dialog.
4.In Illustrator, go to File>Document Setup. From the
5.The Quality/Speed slider should normally be left at the center position. If there problems such as missing portions of the artwork, move the slider one tick to the left. (If you are performing printing only, move it all the way to the left.)
30