33
Illustrator 8 [Windows]
The Kodak Color Management System must be installed to outp ut successfully from Illustrator 8 to Roland
COLORCHOICE Software.
1. From the Roland COLORCHOICE Print Monitor click Setup>Setup Properties . Then click the Print tab.
2. Make sure the Perform Color Correction check box has a chec k in it.
3. Click
OK in the Setup Properties dialog.
4. In Illustrator, go to File>Document Setup.
5. Select ‘Use printers default screen.’
6. Select ‘Use Print Setup’.
7. Click the Print Setup button. Print Setup screen appe ars.
8. Select your printer in the Name field.
9. Click the Properties button.
10. Choose a paper size from the ‘Paper’ field or select a Cus tom page for a custom page size.
11. If you choose a custom page size, you may enter the custom size by clicking the Custom button and
entering the width and height.
12. If you choose custom page, click OK to Custom Defined Size dia log.
13. Click
OK in the Properties dialog.
14. Click
OK in the Print Setup dialog.
15. Click
OK in the Document Setup dialog.
16. If you want your monitor to soft-proof CMYK output, go to Fi le>Color Settings and check ‘Simulate print
colors on display’.
17. Go to File>Print.
18. If not dimmed, set Output to Composite.
19. Set PostScript to Level 3.
20. Check Force Fonts to Download.
21. Click
OK to print.
PageMaker 6.5 [Windows]
These directions assume that you have Kodak ICC Color Man agement installed.
Before starting PageMaker, copy your printers’ PPD files to PM65\RSRC\U SENGLSH\PPD4 directory. The
PPDs can be found on your installation CD in the ‘Ppd’ f older.
1. From the Roland COLORCHOICE Print Monitor click Setup>Setup Properti es. Then click the Print tab.
2. Make sure the Perform Color Correction checkbox has a chec k in it.
3. In the ICC input profile area, select appropriate CMYK and RG B profiles. If you know which profiles your
application is using, select that profile. If you don’t, use the default settings.
4. For the ICC output profile, select the appropriate ink/m edia combination. Also select a rendering intent to
use. Click the Info button to see a full description of the selec ted profile.
5. Click
OK to Setup Properties.
6. In PageMaker go to File>Document Setup.
7. From the Page size field select your paper size or choose Cus tom for a custom page size.