Roland DIF-AT24 owner manual Connecting the VS-2400CD and an Adat device

Connections and settings

Connection example 3

Connecting the VS-2400CD and an ADAT device

This example allows digital audio signals to be transferred. Make connections as shown in the diagram.

To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections.

ADAT device

ADAT OPTICAL IN

ADAT OUT

ADAT OPTICAL OUT

ADAT IN

DIF-AT24

R-BUS

R-BUS

VS-2400CD

Settings

■Sampling Frequency settings

Set the sampling frequency of the VS-2400CD and ADAT device to the same setting (44.1 kHz or 48 kHz).

■Master Clock settings

Master clock device	VS-2400CD setting		DIF-AT24
			MASTER CLK switch
VS-2400CD	PROJECT PARAMETER screen		R-BUS
	❍ MASTER CLOCL	INT
ADAT device	PROJECT PARAMETER screen		ADAT
	❍ MASTER CLOCL	R-BUS

You'll also need to set the Master Clock for the ADAT device. For details on this setting, refer to the owner's manual for the ADAT device.

12