Roland FP-5 owner manual Adjusting the Sound’s Volume and Brilliance, Connecting Headphones

Before You Play

■Turning Off the Power

1.Before switching the power off, turn the volume

all the way down by rotating the [Volume] knob.

fig.00-05

2.Press the [Power] switch on the back of the unit.

The power is switched off.

fig.00-07

Rear Panel

Upper Position

OFF

Adjusting the Sound’s Volume and Brilliance

fig.00-08

1.Use the [Volume] knob to adjust the overall volume level.

Rotating the knob clockwise increases the volume; counterclockwise rotation decreases it.

2.Use the [Brilliance] knob to adjust the overall sound quality.

Rotating the knob clockwise makes the tone brighter; rotating it counterclockwise makes the sound more subdued.

If the FP-5 is positioned against a wall, you will probably want to rotate the knob more to the left.

Connecting Headphones

Connecting headphones allows you to enjoy playing anytime, even at night, without concern.

* Headphones are not included. Consult your Roland dealer if you want to purchase.

fig.00-09

1.Plug the headphones into the Phones jack at the front, on the left side of the piano.

Use the [Volume] knob on the FP-5 to adjust the volume of the headphones.

* Make sure to use stereo headphones.

Some Notes on Using Headphones

•To prevent damage to the cord, handle the headphones only by the headset or the plug.

•The headphones may be damaged if the volume is too high when they are plugged in. Lower the volume on the FP-5 before plugging in the headphones.

•To prevent possible auditory damage, loss of hearing, or damage to the headphones, the headphones should not be used at an excessively high volume. Use the headphones at a moderate volume level.

10