Roland FP-5 owner manual Error Messages/Other Messages, Display Meaning

Error Messages/Other Messages

Display	Meaning
USr	User. Stores recorded Performances (p. 12, p. 38).
Usr.	The “.” in the display indicates that there is Performance material already
	recorded (p. 12, p. 38).
P.	Piano song number (p. 12).
r.	Rhythm number (p. 33).
	This appears when you attempt to delete a recorded song (p. 41).
dEL	Additionally, this appears after recording a song when you try to select
	another song (p. 13).
SUP	This appears when you store setting to set up, or select stored settings (p. 37).
dnP	Bulk Dump. This appears when you transfer the FP-5’s settings to an external
	sequencer (p. 52).
Fct	Factory Reset. This appears when you restore the settings to the factory
	condition (p. 53).
E.32	The amount of performance information is too large, and further recording is
	not possible.
	Too much MIDI data was sent from the external MIDI instrument at one time,
E.40	and the unit could not process the data. Reduce the amount of MIDI data
	being sent to the FP-5.
E.41	A problem such as a loose MIDI cable or computer cable occurred. Make sure
	the MIDI cables and computer cables are correctly hooked up.
	A system error has occurred. Try performing the procedure over again.
E.51	Should this message continue to appear even after repeated attempts, please
	consult the nearest Roland Service Center.

*Error messages are indicated by an “E.” before the number

When the Error message appears, the [-] and [+] button indicators flashes in red. Press the [-] or [+] button, and you can cancel the error message.

56