Practicing
Audio Recording
Here’s how to record what you play on the HP507 as audio data. The recorded song can be used on your computer.
* Thanks to its multiple number of speakers, each of which can be used to play a dierent portion of the overall sound, the HP507 is capable of
producing piano sounds that possess great depth and seem to have three-dimensional presence.
Such eects are produced when you play something on the keyboard, or when you play back a song that’s been recorded as an SMF. However,
when you make an audio recording, the song will consist of two channels (stereo), and such eects cannot be reproduced.
Preparing to record
1. Connect a USB ash drive (sold separately) to the
USB memory port (p. 15).
* Audio data cannot be saved in Favorite (internal
memory).
2. Select the tone that you want perform (p. 18).
3. While holding down the [ ] (Rec) button, press the [–] [+] buttons to select “Audio.”
4. Press the [ ] (Rec) button.
The [ ] (Rec) button will light, the [ ] (Play/Stop) button will blink, and the HP507 will enter recording-standby mode.
If you decide not to record, press the [ ] (Rec) button once again.
5. If desired, sound the metronome (p. 26).
Starting/stopping recording
1. Press the [ ] (Play/Stop) button.
Recording will start.
When recording starts, the [ ] (Rec) button and [ ] (Play/Stop) button
will light.
NOTE
Never turn o the power or disconnect the USB ash drive during recording.
2. Press the [ ] (Play/Stop) button.
Recording will stop, and a conrmation message will ask whether you want to save or erase the recording.
3. Either save the performance or erase it (p. 33).
4
3
1 2
37
Operation Guide Panel Descriptions Before You Play Performing Practicing Piano Designer
Convenient Functions
Appendix
Function Mode