Various Settings (Function Mode)
Indication Value Explanation
Local Control
Preventing Doubled Notes When Connected to a Sequencer (Local Control)
When you have a MIDI sequencer connected, set this parameter to Local O.
Since most sequencers have their Thru function turned on, notes you play on the
keyboard may be sounded in duplicate, or get dropped. To prevent this, you can
enable the “Local O” setting so that the keyboard and internal sound generator will be
disconnected.
O Local Control is o.
The keyboard and composer are disconnected from the internal sound generator. Playing the keyboard will not produce sound.
On Local Control is on.
The keyboard and composer are connected to the internal sound generator.
MIDI Transmit Channel
MIDI Transmit Channel Settings (MIDI Transmit Channel)
This setting species the MIDI channel on which the HP507 will transmit.
MIDI uses sixteen “MIDI channels,” which are numbered 1 through 16. By connecting MIDI
devices and specifying the appropriate MIDI channel for each device, you can play or select
sounds on those devices.
The HP507 will receive all sixteen channels (1–16).
O, 1–16
CD/Audio Type
Setting the Type of CD to be Played Back (CD/Audio Type)
The HP507 may be unable to correctly recognize the type of CD being used. In such instances, you can specify the type of CD manually.
When the unit left the factory, this was set to “Stereo.” Normally, there is no need to make this setting.
MEMO
This setting is automatically saved in the HP507.
Auto, Type A, Type B, Stereo
Save Song Renaming a Song (Save Song) (p. 41)
Here’s how to rename a song you’ve saved.
Copy Song Copying a Saved Song (Copy Song) (p. 45)
A song you’ve saved to Favorite can be copied to the USB ash drive. Alternatively, a song saved to a USB ash drive can be copied to Favorite.
Delete Song Deleting a Saved Song (Delete Song) (p. 46)
You can delete a saved song from Favorite or the USB ash drive.
Format Media Initializing the Memory (Format Media) (p. 46)
You can delete all songs from Favorite or a separately sold USB ash drive.
USB Driver
Changing the USB Driver Settings (USB Driver)
Normally, you don’t need to install a driver in order to connect the HP507 to your computer. However, if some problem occurs,
or if the performance is poor, using the Roland original driver may solve the problem.
In this case, setting “USB Driver” to “Original” on the HP507, install the driver on your personal computer.
After changing this setting, you need to turn o the HP507, then turn it back on again.
MEMO
This setting is automatically saved in the HP507.
For details on downloading and installing the Roland original driver, refer to the Roland website.
Roland website:
http://www.roland.com/
Generic Choose this if you want to use the generic USB driver that was included with your computer. Normally, you should use this mode.
Original Choose this if you want to use a USB driver downloaded from the Roland website.
MIDI
Sequencer
Local Control
Sound Generator
MIDI
In
MIDI
Out
How to save your settings?
Save your settings as described in “Memory
Backup” (p. 44).
50