Various Settings (Function Mode)
Indication Value Explanation
Audio Transpose
Transposing an Audio File (Audio Transpose)
The selected audio le and the sound of a digital audio player connected to the Input jacks can both be transposed for playback.
* For some songs, an audio transpose setting other than 0 may aect the tone quality of the sound.
MEMO
You can also change this setting by holding down the [Transpose] button and using the [–] [+] buttons.
-6–0–5
(semitone units) Positive (+) values raise the pitch in semitone steps, and negative (-) values lower the pitch in semitone steps.
Transpose Mode
Specifying What the Transpose will Aect (Transpose Mode)
This setting species what the transpose will aect. You can use the transpose to change the
pitch of both the song and the keyboard, only the pitch of the song, or only the pitch of the
keyboard.
Keyboard The sound of the keyboard
Song The song being played back and the sound being input via the Input jacks
Keyboard &
Song The sound of the keyboard, the song being played back, and the sound being input via the Input jacks
Octave Shift
Changing the Pitch of the Tone in Octave Steps (Octave Shift)
You can change the pitch of the Tone 2 in Dual Play (p. 19) and Lower tone in Split Play (p. 20) an octave at a time.
Altering the pitch in one-octave units in this way is called “Octave Shift.”
For example, you can raise the pitch of the Lower Tone to the same pitch of the Upper Tone in Split Play.
-2–0–+2 (octave)
Recording Mode
Selecting the Format for Recording (Recording Mode)
You can choose whether to record as SMF or as audio.
MEMO
You can also switch the recording mode by holding down the [ ] (Rec) button and using the [–] [+] buttons.
SMF SMF parts will be recorded separately. This allows you to re-record just a single part, or to overdub dierent parts.
Audio The recording will be made as audio data. The recorded song can be used in your computer.
Damper Pedal Part
Changing How the Pedal Eects Are Applied (Damper Pedal Part)
When you press the damper pedal during Dual play or Split play, the pedal eect is normally
applied to both tones, but you can also select the tone to which the eect is to be applied.
Right & Left All enabled
Right Applied only to the Tone 1 (in dual mode)/Right-hand Tone (in split mode)
Left Applied only to the Tone 2 (in dual mode)/Left-hand Tone (in split mode)
Center Pedal
Changing How the Pedals Work (Center Pedal)
When you turn on the power, the center pedal functions as the sostenuto pedal (p. 14).
You can change the function of the pedal to a variety of other operations.
Sostenuto Sets function to sostenuto pedal.
Play/Stop The pedal will have the same function as the [ ] (Play/Stop) button.
Layer Pressing the pedal will layer on Tone 2, used for Dual play.
* The Layer function can be applied only when using Dual play.
Octave Pressing the pedal will layer on a sound one octave higher.
* The Octave function cannot be applied while using Twin Piano, Dual play, or Split play.
How to save your settings?
Save your settings as described in “Memory
Backup” (p. 44).
How to save your settings?
Save your settings as described in “Memory
Backup” (p. 44).
49
Operation Guide Panel Descriptions Before You Play Performing Practicing Piano Designer
Convenient Functions
Appendix
Function Mode