Roland KC-60 owner manual Using a Speaker Stand

Using a Speaker Stand

By using a speaker stand, you can mount the KC-60 at the optimal height for use as a monitor speaker or simple PA device.

fig. Caution

●The KC-60 is designed to be used only with speaker stands whose dimensions meet the specifications described below.

Do not use it with a speaker stand that does not meet the

following specifications.

fig.05

Diameter: 3.8 cm (1-1/2”)

Leg spread: 120 cm (47-1/4”) or more

fig.06_e

Diameter:
136		cm	(53-
or				9/16”)
	more

Leg spread: 120 cm (47-1/4”) or more

●When deciding on a stand to use with the KC-60, make

sure to pick one that is capable of supporting its weight.

●Before use, adjust the speaker stand to a height of 165 cm (65”) or less and a leg spread of 120 cm (47-1/4”) or more,

as shown in the figure below.

fig.08\

165 cm (65”) or less

120 cm (47-1/4”) or more

●Using a speaker stand that does not meet the specifications at left or that is adjusted to a height over 165 cm (65”), or a leg spread of less than 120 cm (47-1/4”) may result in damage to equipment or injury due to the stand tipping over.

●When using KC-60 with a speaker stand, the speaker stand must be carefully placed so it is level and sure to remain stable.

●Cables connected to KC-60 should be given enough slack to prevent accidents that might result from someone tripping over them.

●To prevent accidents due to falls, do not place any object on the KC-60 when it’s mounted on a speaker stand.

●Always have at least one other person assist you when mounting the KC-60 on a speaker stand, or when adjusting the height of the stand while the KC-60 remains mounted on it.

10