Power Indicator, POWER Switch, AUX IN Jacks, LINE OUT Jack

Panel Descriptions

7. Power Indicator

This indicator illuminates when the power is on.

This switches the power on and off.

*Always be sure to lower the volume on the KC-60 and any connected equipment to 0 whenever turning the power on or off.

*This unit is equipped with a protection circuit. A brief interval (a few seconds) after power up is required before the unit will operate normally.

Slight pop noise may come from the speakers when the power is switched on, but this does not indicate a problem.

*Refer to p. 9 for the order in which to turn the power to connected devices on and off.

These are RCA phono type input jacks.

You use these to connect equipment such as CD and MD players, and have them sound along with the equipment connected to channel 1 through channel 3.

They accept level input of -10 dBu.

*To adjust the volume level of equipment connected to the AUX IN jacks, use the controls on such equipment.

*Even though the input signal may be in stereo, the signal is mixed internally to a mono signal.

Connect mixers, recorders, and other such equipment here.

This output jack provides +4 dBu line level output.

*The MASTER CONTROL knobs (the LOW, HIGH, and VOLUME controls) do not affect the output from LINE OUT.

This lets you play even more powerful bass by connecting a powered subwoofer.

Provides full-range output, at an output level +4 dBu.

You can use the MASTER CONTROL knobs (LOW, HIGH, and VOLUME) to adjust the tone and volume level of the signals output from SUBWOOFER OUT.

*No signals are output from SUBWOOFER OUT when headphones are connected.