36

Performing

In addition to reverb, you can apply a variety of effects to the LX-10’s sounds.
These are referred to as “effects.” With the factory settings, an effect suitable for each tone is
selected.

Effects may not be applied with some of sounds.

fig.Panel-Effects-e.eps

1.

Press the [Effects] button so it’s lit.

Try fingering the keyboard.
The effect is applied to the currently selected tone.
Some tones initially have effect applied. Selecting such a tone makes the [Effects] button light up
automatically.
Effects cannot be applied to audio data or a music CD.

Turning Off the Effects

1.

Press the [Effects] button so its light is turned off.

Here’s how to edit the settings of the effect.

1.

Hold down the [Effects] button and press the [-] [+] buttons.

The screen will show the effect parameters and their values.

fig.d-EffectDepth.eps

The most suitable type of effect is assigned for each tone.
Depending on settings such as 3D Sound Control, the effect may not be applied in some cases.

Adding a Variety Effects to the Sound (Effects)

Editing the Effect Settings

NOTE
NOTE
NOTE
LX-10_e.book 36ページ ２００８年９月２２日　月曜日　午前１０時５１分