Roland owner manual Attaching the M-48 to Any Part of a Mic Stand, Mounting bracket, Below

Installation

Attaching the M-48 to Any Part of a Mic Stand

By using the Roland APC-33 all-purpose clamp (sold separately) in conjunction with the included mounting bracket, you can freely attach the M-48 to any part of a mic stand.

Items to use

•APC-33 attachment screws x 4 (included)

•Screws for fastening the M-48 x 2 (included)

1Using the four included APC-33 attachment screws, attach the APC-33 stand holder to the mounting bracket.

3Insert the hooks located on the M-48’s bottom panel into the slits of the mounting bracket.

You must use the APC-33 attachment screws that were included	Hooks
with the M-48. The M-48 may be damaged if you use the screws	(on the bottom panel)
included with the APC-33.

Stand holder

Mounting bracket

2 Attach the APC-33 to your mic stand or drum, and fasten 4 To more permanently secure the M-48 to the mounting

the mounting bracket.	bracket, fasten with the two included screws as shown
	below.

14

Be careful not to pinch your hand when attaching the M-48 to the mounting bracket. Doing so may cause personal injury.