19
Playing the Keyboard
Adding Breadth to the Sound—Chorus Effect
The MP-500 allows you to add chorus to what you play on the keyboard.
By adding the Chorus Effect, you can give the sound greater dimension, with more
fatness and breadth.
The settings of the Chorus Effect are memorized independently for each sound.
When the power is turned on, the Chorus Effect will be applied to the “Electric Piano 1,”
“Electric Piano 2” and “Vibraphone” sounds. The Chorus Effect will be turned off for the
other sounds.
fig.5-06
1.
Press the [Chorus] button to turn on the indicator.
The Chorus Effect will be applied to the currently selected sound.
fig.5-07.e
When you select a sound for which the Chorus Effect has not been turned on, the
[Chorus] button indicator will go dark.
2.
To cancel the Chorus Effect, press the [Chorus] button once again
to make the indicator go dark.
fig.5-08.e
While using the Dual (p. 16) or Split (p. 17) functions, lighting/extinguishing the
[Chorus] button’s indicator will switch the Chorus Effect on/off for both sounds.
(However, when Split is being used, the Chorus Effect will not be applied to the
Acoustic Bass.)
After Dual or Split is cancelled, the piano reverts to the Chorus Effect setting that
a particular sound normally carries.
The on/off status of the [Chorus] button is not remembered when Dual or Split are
used.
The amount of Chorus can be changed. Please refer to “Changing the Depth of the
Chorus” (p. 27).
Volume MaxMin Reverb Chorus StringsPiano 1 Piano 2 chord
Harpsi- phone Organ
Vibra- Pipe
Piano 1
Electric Piano 2
Electric
120168
Tempo Beat
2084060 80 96 3602 4 Play Rec Demo SongSound On/Off
MetronomeTone
Chorus Chorus
Press Lit
Chorus Chorus
Press Dark
MP-500.e.book 19 ページ ２００３年６月１１日 水曜日 午前９時４６分