Roland owner manual Power, Setting Up the PC-70, How to Connect the AC Adaptor

Models: PC-70

1 28
Download 28 pages 21.22 Kb
Page 10
Image 10

Power

How to Connect the AC Adaptor

The PC-70 can be powered by an AC adaptor.

Be sure to use only the attached AC adaptor. Using any other adaptor may cause malfunction or electric shock.

1.Check that the unit is OFF.

2.Connect the AC adaptor to the AC Adaptor jack, then connect the plug to a power outlet.

*To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections.

*If the unit is to remain unused for an extended period of time, unplug the AC adaptor.

Setting Up the PC-70

The PC-70 is a MIDI controller. Although it contains no sound-generating circuitry of its own, it can effectively control external units (sound module, computer, etc.) by transmitting a wide variety of MIDI messages.

To ensure maximum benefit from your system, be sure to read this manual and the manuals for all external equipment.

Sound Module Setup

Connect between the MIDI OUT connector on the PC-70 and the MIDI IN connector on the sound module.

*To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections.

fig.PC70-SC.e

MIDI OUT

MIDI IN

 

Monitor speakers

PC-70

(self-powered)

INPUT jacks

OUTPUT jacks

LINE IN jacks, AUX jacks,

or TAPE IN jacks

Sound Module

Stereo set, etc.

10

Page 10
Image 10
Roland owner manual Power, Setting Up the PC-70, How to Connect the AC Adaptor