Changing the Velocity Sensitivity: Velocity
Whenever a key is pressed on the instrument, the value for velocity will be transmitted along with the note information. The following setting allows you to choose the sensitivity of the response to velocity (range of possible change).
fig.VeloCurv.e
Slider position: minimum
Velocity value |
Strength of key touch
Slider position: center
Velocity value |
Strength of key touch
Slider position: maximum
Velocity value
Strength of key touch
fig.velocity.e
Velocity |
[Procedure]
1.Set the MIDI channel to match that of the Part (sound module) to be controlled.
2.Press MIDI/SELECT [3] (LED will show “SEL”).
3.Press the F#3 black key (VELOCITY) [8].
4.Press MIDI/SELECT [3] again to confirm your selection. Move the DATA ENTRY slider to select the minimum value, thus setting the desired range for velocity. With the slider at its maximum, velocity values within the entire
18
