Select CC, Enter, Press the F4 white key CC Select

Controllers 96 and above (NRPN/RPN, Channel Mode Messages)

Controller No. Control Function

96.Data Increment

97.Data Decrement

98.Non-Registered Parameter Number LSB

99.Non-Registered Parameter Number MSB

100.Registered Parameter Number LSB

101.Registered Parameter Number MSB

102–120	Undefined
121–127	Reserved for Channel Mode Messages

fig.controller.e

Select CC

Numeric Key Pad

Enter

[Procedure]

1.Set the MIDI transmit channel to match that of the desired Part.

2.Press MIDI/SELECT [3] (LED will show “SEL”).

3.Press the F4 white key (CC SELECT) [13].

4.Select the Controller Number by pressing keys in the NUMERIC ENTRY section [17].

5.Press ENTER [19].

6.Press MIDI/SELECT [3] again to confirm your selection. Now you can use the DATA ENTRY slider to transmit the value of the specified Controller Number.

Page 22

Image 22

Roland PC-70 owner manual Select CC, Enter, Press the F4 white key CC Select

Contents

Page Avis Page Page Table of Contents Maintenance Power SupplyPlacement Additional Precautions About the PC-70 About the Sounds Contained in a GS Sound Module Superb Playability and Expressiveness Complete Range of Control FeaturesAbout the Drum Sets Provided by a GS Sound Module Makes Desk Top Music DTM More Enjoyable Aftertouch Velocity Chorus Level Reverb Level Panpot Volume Panel Descriptions Setting Up the PC-70 PowerHow to Connect the AC Adaptor Desk Top Music Setup Procedure Powering UpSetting the Midi Channel Midi Transmit Channel Midi Channel Press Enter Press the F#4 black key CC 32 Changing Sounds in a GS Sound ModulePress the G#4 black key CC 00 Press Enter Press the A#4 black key Program Change PC Example Changing Drum Sets in a GS Sound ModulePress Enter Press the A#4 black key PC Modifying the Sound of Notes Modulation CC Features Useful When PlayingApplying Pitch Changes to Notes Pitch Bend Adding a Sustain Effect to Notes Hold 1 CC Ex. Shift the Sound Range Down One Octave Octave Down Changing OctavesEx. Shift the Sound Range Up One Octave Octave UP Return to the Normal Sound Range Standard Aftertouch Controlling a Sound Module with the Data Entry SliderPress the F3 white key After Touch Velocity Changing the Velocity Sensitivity VelocityPress the F#3 black key Velocity Chorus Depth Changing the Chorus Depth Chorus Send Level CCChanging the Reverb Depth Reverb Send Level CC Reverb Depth Press the D#4 black key Volume Setting the Sound Location Panpot CCChanging the Volume Volume CC Press the C#4 black key Panpot LSB for controllers Enter Select CCPress the F4 white key CC Select Troubleshooting PC-70 cannot transmit GS Reset messages Midi Implementation Chart Function Omni ON, Poly Specifications Information 02343089 ’00-6-C4-11SK