8

IMPORTANT NOTES

Using USB Memory
704 (edit)
• When connecting USB memory, make sure to press it until
it is fully inserted.
705 (edit)
• Never touch the terminals of the USB memory. Also,
avoid getting the terminals dirty.
708
• USB memory is constructed using precision components;
handle the cards carefully, paying particular note to the
following.
• To prevent damage to the USB memory from static
electricity, be sure to discharge any static electricity
from your own body before handling the USB
memory.
• Do not touch or allow metal to come into contact with
the contact portion of the USB memory.
• Do not bend, drop, or subject USB memory to strong
shock or vibration.
• Do not keep USB memory in direct sunlight, in closed
vehicles, or other such locations (storage temperature:
0 to 50 ˚C).
• Do not allow USB memory to become wet.
• Do not disassemble or modify the USB memory.
Add
• Insert the USB memory in the Ext Memory port evenly
and without undue force. Forcing the USB memory may
damage the Ext Memory port.
Add
• Do not insert any object other than the USB memory (e.g.,
wires, coins, other types of disks, etc.) in the Ext Memory
port. This may damage the Ext Memory port.
Add
• Do not subject the Ext Memory port cover or connected
USB memory to excessive stress.
Add
• Close the USB memory cover when using the USB
memory for extended periods.
Before Using CDs

Handling the CD Drive

Add
• Avoid using the unit immediately after it has been moved
to a location with a level of humidity that is greatly
different than its former location. Rapid changes in the
environment can cause condensation to form inside the
drive, which will adversely affect the operation of the
drive and/or damage discs. When the unit has been
moved, allow it to become accustomed to the new
environment (allow a few hours) before operating it.
Add
• Remove any disc from the drive before powering up or
down.
Add
• To avoid the risk of malfunction and/or damage, insert
only discs with into the CD drive. Never insert any other
type of disc. Avoid getting paper clips, coins, or any other
foreign objects inside the drive.
Add
• Do not subject to vibrations or physical shock during use,
and do not move the unit while the power is turned on.
Add
• The pickup is of dust-resistant construction. Do not use
pickup cleaners or other such materials, as they may
damage the pickup.
Handling the CDs (CD-ROMs)
Add
• When handling the discs, please observe the following.
• Do not touch the encoded surface of the disc.
• Do not use in dusty areas.
• Do not leave the disc in direct sunlight or an enclosed
vehicle.
801
• Avoid touching or scratching the shiny underside
(encoded surface) of the disc. Damaged or dirty CD-ROM
discs may not be read properly. Keep your discs clean
using a commercially available CD cleaner.
Add
• Keep the disc in the case.
Add
• Do not keep the disc in the CD drive for a long time.
Add
• Do not put a sticker on the label of the disc.
Add
• Wipe the disc with a soft and dry cloth radially from
inside to outside. Do not wipe along circumference.
Add
• Do not use benzine, record cleaner spray or solvents of
any kind.
Add
• Do not bend the disc. Bending discs may prevent proper
reading and writing of data, and may further result in
malfunction.
203
* GS ( ) is a registered trademark of Roland
Corporation.
209
* Mac OS is a trademark of Apple Computer, Inc.
Add
* XG lite ( ) is a registered trademark of Yamaha
Corporation.
Add
* This device in part makes use of Independent JPEG
Group software.
220
* All product names mentioned in this document are
trademarks or registered trademarks of their
respective owners.
RG-3M_e3.book 8 ページ ２００８年３月２５日　火曜日　午前１０時１分