103

Chapter 7. Connecting External Devices

Connecting to Audio Equipment

You can connect audio devices to play the sound of the RG-
3M through the speakers of your audio system, or to record
your performance on a recording device.

■

Connectors

fig.07-010

Output Jacks

You can connect audio equipment using audio cables
(sold separately) and play the sounds from the RG-3M
through the speakers on the connected equipment, or
record your performances on a recording device.
If the input of the connected device is monaural, you
must use the L (Mono) jack.

Input Jacks

You can connect another sound generator, such as audio
equipment or an electronic instrument, using audio
cables (sold separately). Play the sounds from the
connected device through the speakers on the RG-3M.
If the output of the connected device is monaural, you
must use the L (Mono) jack.
* You cannot use the RG-3M to adjust the volume of the
connected sound generating device.

About the Output jack

922

This instrument is equipped with balanced (XLR) type jacks.
Wiring diagrams for these jacks are shown below. Make
connections after first checking the wiring diagrams of other
equipment you intend to connect.

■

Making the Connections
NOTE

To prevent malfunction and/or damage to speakers or
other devices, always turn down the volume, and turn off
the power on all devices before making any connections.

fig.07-020

1.

Turn the volume all the way down on the RG-3M
and on the device you’re about to connect.

2.

Turn off the power to the RG-3M and other
connected equipment.

3.

Use audio cables (sold separately) to make the
connection.

4.

Switch on the RG-3M.

5.

Switch on the connected device.

6.

Adjust the volume level on the RG-3M and the
connected device.

Recording RG-3M Performances on a Recording Device

7.

Start recording with the connected device.

8.

Play the keyboard.

9.

When the performance ends, stop recording on
the connected equipment.

Turning off the power

1.

Set the volume of the RG-3M and of the
connected devices to the minimum position.

2.

Turn off the connected equipment.

3.

Turn off the power to the RG-3M.

4.

Disconnect the audio cables connected to the RG-
3M.
Jack Panel

Playing Sounds from the RG-3M Through the
Speakers on Audio Equipment or Recording
Your Performances on a Recording Device
Jack Panel
Input R/L
(Line In, Aux In)
RG-3M_e3.book 103 ページ ２００８年３月２５日　火曜日　午前１０時１分