76
Chapter 3. Performance

Restoring the Factory Settings (Factory Reset)

You can return the content stored with “Memory Backup” (refer to the
previous page) to their original factory settings.
This operation is referred to as “Factory Reset.”

1.

Press the [Function] (Exit) button so the indicator is lit.

2.

Press the [Song] (Select -) button or [ ] (Select +) button to

display the FACTORY RESET screen.

fig.03-420d

3.

Press the [Moving Key] (Enter) button.

A confirmation message appears in the screen.

fig.03-430d

Pressing the [Function] (Exit) button at this point returns you to the original
screen without Factory Reset being executed.

4.

Press the [Moving Key] (Enter) button once more.

Factory reset is executed.
When the factory reset is complete and the screen shown below appears,
switch the power off, then back on.

fig.03-431d
NOTE
When you perform a
Factory Reset, all settings
that have been stored in
memory up to then are
erased and reset to their
factory defaults.
When you want to restore
the content registered to
the RG-3M��s User memory
to the factory condition,
refer to “Initializing the
User Memory and USB
Memory” (p. 97).
NOTE
Never turn off the power
while “Executing...” is
displayed in the screen.
Doing so may corrupt the
RG-3M’s memory and render
it unusable.
RG-3M_e3.book 76ページ ２００８年３月２５日　火曜日　午前１０時１分