20
Practicing
1.
Press the [BEAT] button.
The METRONOME icon will blink in the display.
2.
Turn the select knob to choose the parameter that
you want to edit, and then press the select knob.
The value of the parameter you’re editing will blink.
3.
Turn the select knob to edit the value, and then
press the select knob.
If there are only two values, you can press the select knob to
toggle between the two values.
4.
When you’ve finished editing, turn the select knob
to choose “[OK],” and then press the select knob.
If you decide to discard your changes, turn the select knob
to choose “[CANCEL]” and then press the select knob.
You will exit the editing screen.
As an alternative to selecting “[OK]” in step 4, you can
press the [BEAT] button or one of the [1]–[4] buttons to
change the settings and exit the metronome setting
screen.
The changes you've made will be lost if you turn off the
power without exiting the setting screen.
Changing the Metronome Settings Parameter Value Explanation
Beat
0–13
Specifies the time signature of the
metronome. If you choose “0,” no ac-
cent will be applied.
Rhythm
Specifies how the metronome will
sound.
Whole note
Quarter note
Eighth note
Triplet
Sixteenth note
Volume
0–10 Adjusts the volume of the metro-
nome.
Sound
1–7
Changes the sound of the metro-
nome.
1: ELECTRONIC
2: SWEEP
3: STICKS
4: BEEP
5: PULSE
6: COWBELL
7: SHAKER
Grade
EASY, HARD
Specifies whether the Time Check in-
dicator will evaluate your playing le-
niently (EASY) or strictly (HARD).
LineOut
ON, OF
Specifies whether the metronome
sound will be sent from the OUTPUT
jack (ON) or not sent (OF).
Parameter Value
RMP-12_e.book 20ページ ２００８年７月１１日 金曜日 午前９時４５分