10

Panel Descriptions

fig.Connect.eps
• If you use an AC adaptor, use only the specified model (PSB-series).
• When connection cables with resistors are used, the volume level of equipment connected to the input (MIX IN jack) may be low. If
this happens, use connection cables that do not contain resistors.
• The RMP-12’s output is monaural.
• Do not use a conversion adaptor plug. The weight of the plug may cause it to fall out of the jack during performance.
• To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all
devices before making any connections.
Side Panel
to Power outlet
to the TRIGGER OUT jack of the pad
Indicator
AC adaptor
(sold separately)
Power Cord
Headphones
Monitor Amplifier, etc.
Wireless transmitter,
etc.
Portable audio player,
etc.
TRIGGER IN Jack
Use the included cable to connect the pad here.
* This cable is connected when the RMP-12 is
shipped from the factory.
DC IN Jack
You can connect an AC adaptor (ROLAND PSB-
series; sold separately) here.
If you use an AC adaptor, you’ll be able to perform
for an extended period of time without worrying
about the batteries running down.
[PHONES VOLUME] Knob
This adjusts the volume of the headphones.
PHONES Jack (stereo)
Connect your headphones here.
MIX IN Jack (stereo)
If you connect a portable audio player or other
audio source here, you’ll be able to practice along
with the music. The sound from this jack will be
output to the headphone jack.
* The sound received at the MIX IN jack is not
output from the OUTPUT jack.
OUTPUT (MONO) Jack
Connect this to your external amp or wireless
transmitter.
RMP-12_e.book 10ページ ２００８年７月１１日　金曜日　午前９時４５分